80MM X 80MM X 25MM THERMAL OPTIMUM80 CASH REGISTER ROLL IN A CARTON OF 50
- 80mm width x 80mm diameter x 25mm core inside diameter
- OPTIMUM80 Range
- Longer paper length
- Epson approved papers
- Compatible with all brands of 80mm thermal printers
- Coating faces out
- > ~58gsm paper weight
- ~72-79M length
- 5-7 years image life (kept in optimal conditions)
CORRECT STORAGE FOR THERMAL PAPERS
1. AVOID HOT AND/OR HUMID ENVIRONMENTS
1-1 For long-term storage, store THERMAL in the dark at an average ambient temperature of less than 25°C and a relative humidity of less than 65%.
1-2 THERMAL begins to develop colour between 60°C - 100°C and reaches applicable density at between 70°C to 120°C. The paper, however, displays similar signs of development under high temperature or high humidity conditions. If the paper is used continuously at temperatures of 40°C or above for more than 24 hours, attention should be paid to the ambient temperature and humidity.
2. AVOID EXPOSURE TO DIRECT SUNLIGHT
2-1 The paper will yellow if exposed to direct sunlight for prolonged periods. The printed image also tends to fade in direct sunlight.
2-2 The image tends to fade when left exposed to conventional fluorescent light for prolonged periods of time. Therefore, printed-paper should be filed soon after printing.
3. DO NOT USE SOLVENT-TYPE ADHESIVES
3-1 Adhesives containing volatile organic solvents such as alcohols, esters, ketones etcetera, cause color formation.
3-2 Adhesives based on starch, PVA or CMC are harmless and hence recommended.
4. AVOID CONTACT WITH PLASTICIZERS
4-1 PVC film contains plasticizer such as esterphtalate and prolonged contact reduces the image forming ability of the paper and causes printed images to fade as well. For storage, files and cases made of polyolefins or polyesters are recommended.
4-2 Self-adhesive cellophane tapes might contain plasticizer, which cause the printed image to fade. When tacking THERMAL, double-sided self-adhesive tape applied to the back side of THERMAL is recommended.
4-3 Wax-type thermal paper might also contain plasticizer fading the image of THERMAL. Do not store these two types of thermal papers in the same file or case.
5-1 Avoid direct contact with freshly developed diazo copying paper as it might induce colour forming on the surface of THERMAL.
5-2 Avoid direct contact with carbon and carbonless copying papers as these might reduce printability or cause the printed image of THERMAL to fade.
5-3 Human body fluids like sweat cause the printed image of THERMAL to fade. Please pay attention to proper paper handling.
5-4 THERMAL sheets must be stored with their printed surfaces separate from each other because the printed image might slightly be transferred from one surface to the other.
5-5 Frictional heat induced by scratching or pressure by hard metal objects, fingernails etcetera causes images to be developed.